Deluxe Stitcher

Side Feed Heads

DELUXE STITCHER SIDE FEED HEADS

G5 Head

The G5 Head was designed with the latest technology in mind. From its front-locking mount system, to its Latchless construction and side-feed operation, this Head is easy to use. The G5 is a low-cost alternative for collators requiring a smaller capacity Head with greater reliability.

  • Capacity: from 2 sheets up to 13/64" (5mm)

  • Crown Sizes: 1/2", 3/16" Loop

  • Wire Size: 25 round

  • Minimum Head Center: 1-1/2" (38mm) World narrowest.

  • Speed: 12,000 stitches per hour

  • Shipping Dimensions: 10" x 5" x 7" [25cm x 13cm x 18cm]

  • Shipping Weight: 8 lbs. [3.6kg]

A smaller capacity head with greater reliability, the G5 Head is an answer to our customers' requests. From its front-locking mount system, to its Latchless construction and side-feed operation, this Head is easy to use. No tools are required to thread or operate the G5 and only a single adjustment is needed to change the wire draw.

G8 Head

The G8 Head features a side-feed design, eliminating the need for a Swivel, dramatically increasing the reliability of this head and can be used on virtually any stitcher or collator which uses DeLuxe Stitcher, ISP/Interlake, 26 Heads or Hohner 52/8, 55/7 and 48/5 Heads.

  • Capacity: from 2 sheets up to 5/16" (8mm)

  • Crown Sizes: 1/2"

  • Wire Sizes: 23-28 round and 21x25 flat (standard configuration 24ga)

  • Minimum Head Center: 2-3/64" (52mm)

  • Speed: 20,000 stitches per hour, 12,000 Loop stitches per hour

  • Options: Loop and Stop Stitch Kits

  • Shipping Dimensions: 21" x 10" x 6" [54cm x 25cm x 16cm]

  • Shipping Weight: 13 lbs. [5.9 kg]

The side-feed design eliminates the Swivel, wire jamming and dropped stitches.

This head can be used on any stitcher or collator using DeLuxe Stitcher 26/26D, ISP/Interlake/Acme Champion 26 or Magnatek and Hohner 52/8, 55/7 and 48/5 Heads.

User-friendly features include a "snap-out" Wire Tube, a "swing-away" Wire Holder Spring and an on/off Feed Lever.

G20 Head

Like the G8, the G20 head features a side-feed design eliminating the need for a Swivel which results in increased production speeds and decreased down-time. The G20 Head can be used on all dual-drive stitchers or saddle-binders which currently use 18D or Hohner 70/20 Heads.

  • Capacity: from 2 sheets up to 3/4" (20mm)

  • Crown Sizes: 1/2" or 5/8" (13mm or 16mm)

  • Wire Sizes: 20-28 round or 21x25 and 20x24 flat

  • Minimum Head Center: 2-3/4" (70mm) at 3/16" (5mm work thickeness)

  • Speed: 18,000 stitches per hour, 12,000 Loop stitches per hour

  • Options: Loop and Stop Stitch Kits

  • Shipping Dimensions: 21" x 10" x 6" [54cm x 25cm x16cm]

  • Shipping Weight: 22 lbs. [10 kg]

The side-feed design eliminates the Swivel, wire jamming and dropped stitches.

This head can be used on any dual-drive stitcher or saddle-binder using DeLuxe Stitcher 18D or Hohner 70/20 Heads including: Bielomatic, ECH Will, Harris, Kugler, McCain, Sheridan and others.

User-friendly features include a "snap-out" Wire Tube, a "swing-away" Wire Holder Spring and an on/off Feed Lever.

CONTACT US

IF YOU ARE INTERESTED IN RECEIVING MORE INFORMATION ABOUT OUR

STITCHING HEADS AND MACHINES OR CUSTOMIZATION, PLEASE FILL OUT THE

FORM BELOW OR CONTACT US  -  SEE OUR CONTACT PAGE